Original operating instructions Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Page 6
Rated speed under no load Direct current (DC) Li-ion battery Hilti Li-ion battery type series used. Observe the information given in the section headed In- tended use. The product supports wireless data transmission compatible with iOS and Android platforms. Never use the battery as a striking tool.
Page 7
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. ▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Page 8
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height or show signs of damage. In this case, always contact your Hilti Service. ▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable location, well away from flammable materials, where it can be kept under observation and allowed to cool down.
Page 9
Battery charge status cannot be displayed while the control switch is pressed. Items supplied Drill / driver, operating instructions. You can find other system products approved for use with your product at your local Hilti Center or • online at: www.hilti.group.
Technical data Technical data SFC 14A SFC 22A Rated voltage 14.4 V 21.6 V Weight in accordance with EPTA procedure 01 1.5 kg 2.4 kg Speed in 1st gear 0 /min … 500 /min 0 /min … 600 /min Speed in 2nd gear 0 /min …...
Preparations at the workplace CAUTION Risk of injury by inadvertent starting! ▶ Before inserting the battery, make sure that the product is switched off. ▶ Remove the battery before making any adjustments to the power tool or before changing accessories. Observe the safety instructions and warnings in this documentation and on the product.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired immediately by Hilti Service. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group.
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting. ▶ Dispose of your battery out of the reach of children. ▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions.