Turning Power On/Off; Turning On The Main Power; Turning Power On - Sharp PN-LC862 Operation Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

PN-LC652
Main power switch
When you turn on the main power, the monitor enters standby
state.
Off mode, when main power is off.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Main power switch

Turning power on

1. Press the POWER button.
Status
Blue lit
Orange lit
Orange flashing (at approx. 2
seconds interval)
Orange flashing (at approx. 1
second interval)
*1 When "Power save mode" is set to on.
Standby mode when "Wake On LAN" is set to off.
Networked standby mode when "Wake On LAN" is set to
on.
Networked standby mode allows the monitor to be turned
on via network (LAN, RS-232C, and HDMI CEC).
*2 When "Power save mode" is set to off.
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• To disable the logo screen from displaying when turning the
power on, set "Logo screen" to off on the Setup menu. (See
page 46.)
• You can fix the input mode that appears after startup. Set
"Start input mode" of "Others" on the Input menu. (See
page 50.)
POWER button
Power LED
Status of the monitor
Power on
Sleep state (Backlight off)
1
Power off (Standby state* )
2
Power off (Standby state* )
Input signal waiting state
17
E