Menu Item Details - Sharp PN-LC862 Operation Manual

Menu Items

Menu item details

n Setup
Monitor
Operation mode
"Mode1" is the recommended setting and conforms to the "Normal Configuration" as defined in the EcoDesign Regulation
(2019/2021).
Mode1 ......................... "Power management" is set to "Power standby" and "Power save mode" is set to on.
Mode2 ......................... "Power management" is set to "Signal waiting mode" and "Power save mode" is set to off.
Power save mode
When set to off, startup time from standby state is reduced. Note, however, that more power will be consumed in standby
state. APPLICATION mode continues to run in standby state.
When set to on, current consumption is reduced while the monitor is in standby state. APPLICATION mode is also shut
down. Note, however, that the startup time from standby state becomes longer.
If set to on, configure whether the "Wake On LAN" should be enabled. (See below.)
Power management
Sets whether or not to move to input signal waiting state or standby state in the no signal state.
Disabled ...................... Do not move.
Signal waiting mode.... Move to input signal waiting state.
Power standby ............ If the no signal state continues for approximately 5 minutes, the monitor moves to the standby state.
Wake On LAN
This configures whether or not to enable the "Wake On LAN" when the "Power save mode" is set to on.
When set to on, standby state is networked standby mode.
When set to off, standby state is standby mode.
Off if no operation
Determines whether or not to set the monitor to go into standby state when there is no operation. If a switch is to be made, it
also configures the time until the switch is made.
Home screen .............. Sets the operation while the home screen of APPLICATION mode is displayed.
Apps/External input..... Sets the operation while a screen other than the home screen of APPLICATION mode is displayed
Home screen
App icon layout on home screen
Sets the icons of the applications to be arranged on the home screen of APPLICATION mode.
Synappx settings
Synappx setting.............. Sets whether or not to display the "Synappx" icon on the home screen of APPLICATION mode.
Input for Synappx ........... When "Synappx setting" is set to on, sets the input terminal to which the computer on which
Others
Sidebar
Sets whether or not to display the sidebar.
Logo screen
Sets whether or not to display the logo screen when turning the power on.
Startup animation
Sets whether or not to display the animation when turning the power on.
Color Universal Design
The following applications are designed with Color Universal Design to enable better visibility for most people, regardless of
differences of color vision between individuals.
When set to on, the screen is displayed conforming to Color Universal Design.
• Overlay board
• Whiteboard
46
E
These settings can not be changed.
"Wake On LAN" is set to off.
These settings can be changed.
The application data that is not saved is lost.
(i.e., application screen, external input).
Synappx is installed is connected.