Sharp PN-LC862 Operation Manual page 47

n Network
Wireless LAN
Sets whether or not to use a wireless LAN when attaching a wireless adapter. To use a wireless LAN, set the access points.
You cannot use the "Access point" when using a "Wireless LAN".
Cannot be used simultaneously with Ethernet. Ethernet is preferred if there is a connection on Ethernet.
Ethernet
Sets whether or not to use a LAN terminal.
To use a LAN terminal, set the IP address, etc.
Access point
Sets whether or not to use this monitor as an access point when attaching a wireless adapter.
To change the settings, touch "Change". You can change "Access point name", "Encryption mode" and "Password".
After completing the settings, touch "Save".
You cannot use the "Wireless LAN" when using a "Access point".
Communication settings
Monitor control via network
Sets whether or not to control this monitor via network.
Advanced:
User name ............................. Sets an account name when connecting to this monitor.
Password ............................... Sets a password when connecting to this monitor.
Port ........................................ Sets the port number to be used.
Auto logout time (minutes) ..... Sets the time to logout automatically by minutes when there is no communication.
Reset ......................................... Initialize the "Monitor control via network" settings.
Command Format
Select the command format.
For details of each command, see the manual on the following website.
https://www.sharp.eu/download-centre
Menu Items
47
E