Freeze - Sharp PN-LC862 Operation Manual

Basic Operation

Freeze

Freezes the video shown on the monitor.
Either press the FREEZE button on the remote control unit, or touch
In the case of a still image,
Settings window
Settings window:
Touch to operate.
The overlay board will be displayed. (See page 29.)
Cancel the still state.
Caution
• In some cases a residual image may occur. Do not freeze the video for a long time.
TIPS
• If you want to mute the audio from a still image, set "Mute with freeze" on the General menu to on.
• To cancel, press any button other than the POWER button, MUTE button or VOLUME button on the remote control unit.
Freeze is also canceled when the input signal changes (switching to no signal, changing the resolution, etc.).
30
E
is displayed at the top left of the screen.
on the sidebar and touch .