Sharp PN-LC862 Operation Manual page 32

Whiteboard
nFunction list
Tool
Draw lines. (See page 33.)
Erase a line that you drew. (See page 33.)
Select a drawn line.
You can move, zoom in on, or zoom out on the selected line. (See page 34.)
Draw a figure.
After selecting a figure, drag an area to include the figure.
Insert the file on the sheet. You can also call up an application. (See page 34.)
Undo the previous drawing or edit. You can repeat undo a maximum of 20 times.
Redo an undone action.
Selects the behaviors of the multi-finger operation.
It changes every time you touch it.
When set to off, each can be used for drawing (maximum 20).
When set to on, it can be zoomed in/out by pinching. The display position can be moved by dragging it with 3
fingers.
The menu will appear.
Touch again to close the menu.
Close the current whiteboard and create a new whiteboard.
A message appears if the current whiteboard has not been saved. Save the whiteboard you need.
Open the whiteboard.
Save the whiteboard.
Save the whiteboard as a different whiteboard.
Display an image of the screen that is currently displayed on this monitor on a device such as a smartphone
via the internet.
Scan the QR code displayed.
A password can be requested when displaying image.
"Encryption" is set to on and enter the displayed password.
Print a sheet. (See page 43.)
Change the settings of this application. (See page 35.)
Exit this application.
Shows the current sheet number and the total number of sheets. You can change the sheet displayed with
or
Touching this will zoom out all sheets. The sheet can be moved or deleted.
Add a new sheet behind the currently displayed sheet.
Switches the display position of the menu and sheet number to the left and right.
32
E
.
Function