Programming Hot Water Servings; Loading Default Data - LAVAZZA WEGA EP 4100 BM Use And Maintenance Manual

E S P R E S S O P O I N T
8.3

PROGRAMMING HOT WATER SERVINGS

hold down the key (3)
the dose key LEDs);
place the cup under the hot water dispensing nozzle;
press the key (Hot water) all the servings key LEDs will come on;
when the desired serving has been reached, press the key
to exit the programming mode, ust wait 30 seconds without performing any operations on the push-button panel.
1 1,5
0,5
2,5
0
bar
Hot water
8.4

LOADING DEFAULT DATA

To restore the factory settings, hold down the keys
of the machine.
The confirmation of the successful loading of the default data is indicated by the sequential flashing of all the LEDs on the push-
button panel.
72
english
espresso coffee machine - user instructions
on the right-hand side of the push button panel for at least 5 seconds (Lighting up of all of
2
(7)
7
8
9
(Hot water) again
3
(8) (9)
1 1,5
0,5 2
2,5
0
bar
for 5 seconds at the start-up