Trouble Shooting - H&S 6116 Operator's Manual

WARNING:
MAKE SURE THAT THE TRACTOR IS SHUT OFF AND THE RAKE CAN NOT MOVE
BEFORE SERVICING THE FLEX-FRAME RAKE. MAINTENANCE AND REPAIR
SERVICE WORK TO BE PERFORMED BY A QUALIFIED SERVICE PERSON ONLY.
TROUBLE
Rake Will Not Open
Rake Will Not Close
Rake Wheels Will Not
Lower

TROUBLE SHOOTING

POSSIBLE CAUSE
Rake Locked In Transport
Hydraulic Couplers Not Coupled
To Tractor Properly
Hydraulic Hoses Mixed Up With
Rake Wheel Lift Hose
Tractor Hydraulics Do Not Have
Sufficient Pressure
Tractor Hydraulics Do Not Have
Sufficient Pressure
Rake Wheels Locked In Transport
Lift Pipe Binding
-26-
POSSIBLE REMEDY
Remove Transport Locks And
Return To Storage Position
Couple Hydraulic Hoses To Tractor
Sort Hoses Correctly And Re-couple
To Tractor
Tractor Should Have At Least 1500
PSI To Operate Rake
NOTE: Always Drive Forward Slowly
And Open Rake At The Same Time
Tractor Should Have At Least 1500
PSI To Operate Rake
NOTE: Always Drive Forward Slowly
And Open Rake At The Same Time
Remove Hair Pin From Adjuster,
Place In Storage Position
Check Lift Pipe Make Sure It Is Free
Moving