Table of Contents
Advertisement
If auxiliary electric heating function is on, press Function button to confirm or press Enter/cancel
button to cancel. In this case, E-HEATER won't be displayed, which means E-heater is prohibited to be
turned on.
The setting of this function is shown as Fig.5.11 below:
Note:
1.
E-heater can not be set in cooling, dry and fan mode, E-heater mark won't be
displayed. The setting is shown in Fig.5.11.
2.
There is not E-heater for A2 and cassette unit.
5.12
Function
Blow
Blow function: After the unit is turned off, water in evaporator of indoor unit will be automatically
evaporated to avoid mildew.
In cooling and dry mode, press Function button till the unit enters dry function, BLOW blinking, and
then press Enter/cancel button to turn on this function.
In blow mode, press Function button till the unit enters blow function and then press Enter/cancel
button to cancel this function.
Dry function setting is shown in Fig.5.12
Fig. 5.11 Auxiliary Electric Heating Function Setting
Setting
17
Advertisement
Table of Contents
