Table of Contents
Advertisement
and it can't be adjusted.
•
Under energy-saving function, set temperature can't be adjusted.
•
Sleep function and energy-saving function can't operate at the
same time. If energy-saving function has been set under cool
mode, press "Clock" and "Light" buttons simultaneously will cancel
energy-saving function. If sleep function has been set under cool
mode, start up the energy-saving function will cancel sleep function.
Child lock function
Hold " On/Off " and " - " buttons simultaneously for 3s to turn on or
turn off child lock function. When child lock function is on, "
displayed on remote controller. If you operate the remote controller,
the "
" icon will blink three times without sending signal to the unit.
8°C Heating function
Under heating mode, set temperature to 8°C to turn on 8 °C heating
function.The air conditioner keeps the heating status at 8°C.
NOTE:
•
Under 8°C heating function,fan speed is defaulted at auto speed
and it can't be adjusted.
Temperature display switchover function
Under OFF status, hold "Mode" and " - " buttons simultaneously for 3s
to switch temperature displaybetween °C and °F.
function
function is for limiting power of the whole unit. Press "Mode" and
"Light" buttons simultaneously, the remote controller will circularly
display as the following:
•
Maximum power limited under the
mode.
•
If you want to cancel the power limiting function, press "Mode" and
"Light" buttons simultaneously till the icon in remote controller is
blank
No Setting
mode is lower than that of
18
" icon is
GB
Advertisement
Table of Contents
