I-Feel Function; Child Lock Function - Toyotomi THN-A28VR22 User Manual

Wall mounted air conditioner inverter type
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 53
lights on indoor unit during operation based on ambient brightness.
– When unit is ON, press MODE button and then press buttons
to choose LIGHT indication that fl ashes on remote controller's screen. Press
button OK to activate or deactivate LIGHT function.

18. I-FEEL FUNCTION

– When unit is on Cooling mode, press MENU button and then press buttons
,
,
,
to choose I-FEEL indication that fl ashes on remote controller's
screen. Press button OK to activate or deactivate the comfortable wind to
the user.
– When I-FEEL mode is activated, fan speed is set to Auto and swing function
will be cancelled. During I-FEEL function, the operations that turns off the
unit, change running mode and activate SLEEP function, FAN speed and
SWING mode, deactivates automatically I-FEEL function and resume the
initial running mode.
19. ANTI-F FUNCTION (Auto Clean):
– When the unit is closed under the modes of cooling, dry or auto (cooling),
it will continue to operate for about 3 minutes to dry the moisture on the
evaporator, so as to prevent accumulation of bacteria on the evaporator,
which causes fungus and a strange smell and is harmful to the health.
– When the unit is off, press the «MENU» button, then press
SWING and
U/D SWING and select the «Anti-F» function that will blink,
by pressing the «OK» button that fl ashes the «Anti-F» indicator, which it will
activate or deactivate the « Anti-F « function.
20. iCLEAN FUNCTION (Sterilization 56
– Air conditioner will automatically clean dust from the evaporator and will dry
the moisture.
– When unit is OFF, press MENU button and then press buttons
choose iCLEAN indication that fl ashes on remote controller's screen. Press
button OK to activate or deactivate Sterilization function.
– Sterilization function stops automatically after 30 minutes.
21. CHILD-LOCK FUNCTION
– Press simultaneously buttons HEAT and MODE for at least 3 seconds, to
activate or deactivate LOCK function.
– When LOCK function is activated, indication
controll screen.
** Function ELE.H, is not available.
o
C)
will appear on remote
74
,
,
,
(+),
(-), L/R
,
, ,
to
GB

Advertisement

Table of Contents
loading

Table of Contents