Function Introduction For Combination Buttons - Toyotomi HTN/HTG21-709R32 User Manual

Introduction for buttons on remote controller
12
Light button
Press this button to
off the display's
light.

Function introduction for combination buttons

Combination of " " and " " buttons: About lock
Press " " and "
controller is locked,
three times.
Combination of "MODE" and " " buttons:
About switch between Fahrenheit and centigrade
At unit OFF, press "MODE" and "
Combination of "TEMP" and "TIMER" buttons:
About Energy-saving Function
Press "TEMP" and "TIMER" simultaneously in COOL mode to start e nergy-saving function.
Nixie tube on the remote controller displays "SE". Repeat the operation to quit the function.
Combination of "TEMP" and "TIMER" buttons:
About 8 Heating Function (Not available)
Press "TEMP" and "TIMER" simultaneously in HEAT mode to start 8
Nixie tube on the remote controller displays "
(46 if Fahrenheit is adopted). Repeat the operation to quit the function.
turn on the display's light and press this button again to turn
" buttons simultaneously 3s to lock or unlock the keypad. If the remote
is displayed. In this case, pressing any button,
" buttons simultaneously to switch between
" and a selected temperature of "8 ".
15
blinks
and
Heating Function
GB
.