Table of Contents
Advertisement
NOTE
•
Under on and off status, you can set TIMER OFF or TIMER ON
simultaneously.
•
Before setting TIMER ON or TIMER OFF, please adjust the clock
time.
•
When turning on TIMER ON or TIMER OFF function, set this function
valid all the time and the air conditioner will be turned on or turned
off at set temperature every day. ON/OFF button has no affect to
setting. If this function is not required, use the remote controller to
cancel it.
Light button
Press this button to control the LED status on the displayer, the
circulation change is as follow:
When selecting "
on indoor unit will adjust the luminance automatically according to
the ambient intensity of illumination.
NOTE
•
Auto LED function is not available.
•
Light function is available.
Function introduction for combination buttons
Energy-saving function
Under cooling mode, press "Mode" and "Clock" buttons simultaneously
to start up or turn off energy-saving function. When energy-saving
function is started up, "SE" will be shown on remote controller, and air
conditioner will adjust the set temperature automatically according
to ex-factory setting to reach to the best energy-saving effect. Press
"Mode" and "Clock" buttons simultaneously again to exit energy-
saving function.
NOTE
•
Under energy-saving function, fan speed is defaulted at auto speed
no display
" (Auto LED) with remote controller, LED indicator
17
no display
GB
Advertisement
Table of Contents
