Function Introduction For Combination Buttons; Child Lock Function - Toyotomi TKN-628R32 User Manual

Function introduction for combination buttons

Energy-saving function
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to
start up or turn off energy-saving function. When energy-saving function is started
up, "SE" will be shown on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "TEMP" and "CLOCK"buttons simultaneously again to
exit energy-saving function.
Note:
be adjusted.
Under energy-saving function, set temperature can't be adjusted. Press "TURBO"
button and the remote controller won't send signal.
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
8 heating function
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
up or turn off 8
will be shown on remote controller, and the air conditioner keep the heating status
at 8 . Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
heating function.
Note:
heating function, fan speed is defaulted at auto speed and it can't be
adjusted.
heating function, set temperature can't be adjusted. Press "TURBO"
button and the remote controller won't send signal.
heating function has been set under cooling mode, press sleep button will cancel
8 heating function. If sleep function has been set under cooling mode, start up
the 8 heating function will cancel sleep function.
temperature display, the remote controller will display 46

Child lock function

child lock function is on, "
the remote controller, the "
the unit.
Temperature display switchover function
Under OFF status, press "
erature display between
heating function. When this function is started up, "
heating function can't operate at the same time. If 8
" icon is displayed on remote controller. If you operate
" icon will blink three times without sending signal to
" and "MODE" buttons simultaneously to switch temp-
and
ed is defaulted at auto speed and it can't
ion can't operate at the same time. If
.
20
" and "8
heating.
ff child lock function. When
"
GB