Clock Button - Toyotomi TKN-2328R32 User Manual

Clock button

Press this button to set clock time. "
blink. Press "+" or "-" button within 5s to set clock time. Each pressing
of "+" or "-" button, clock time will increase or decrease 1 minute. If
hold "+" or "-" button, 2s later, time will change quickly. Release this
button when reaching your required time. Press "CLOCK" button to
confirm the time. "
NOTE
• Clock time adopts 24-hour mode.
• The interval between two operations can't exceed 5s. Otherwise,
remote controller will quit setting status. Operation for TIMER ON/
TIMER OFF is the same.
/ Timer on / Timer off button
• TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing
this button, "
controller blinks. Press " + " or " - " button to adjust TIMER ON
setting. After each pressing " + " or " - " button. TIMER ON setting
will increase or decrease 1min. Holding " + " or " - " button, 2s later,
the time will change quickly until reaching your required time.
Press "TIMER ON" to confirm it. The word "ON" will stop blinking. "
" icon resumes displaying. Cancel TIMER ON: Under the condition
that TIMER ON is started up, press "TIMER ON" button to cancel it.
• TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing
this button, "
controller blinks. Press " + " or " - " button to adjust TIMER OFF
setting. After each pressing " + " or " - " button, TIMER OFF setting
will increase or decrease 1min. Holding " + " or " - " button, 2s later,
the time will change quickly until reaching your required time.
Press "TIMER OFF" and the word "OFF" will stop blinking. "
resumes displaying. Under the condition that TIMER OFF is started
up, press "TIMER OFF" button to cancel it.
" icon stops blinking.
" icon disappears and the word "ON" on remote
"icon disappears and the word "OFF" on remote
16
" icon on remote controller will
" icon
GB