Reference Station Settings Submenu - CHCNAV iBase GNSS User Manual

5.3.3 Reference Station Settings Submenu

Use this screen to configure settings such as the station coordinates and the broadcast station
identifiers. You must enter accurate information in these fields, as this data affects the
accuracy of logged data files and broadcast correction data significantly:
For Reference Station Mode:
There are three modes available:
a) Auto Rover: The receiver will serve as a rover after this mode is enabled, and then
receive correction data through the working mode set last time.
b) Auto Base: The receiver will serve as a base after this mode is enabled, and then
CHCNAV iBase GNSS USER GUIDE
| 2023-2
Configuring Through a Web Browser
P a g e | 41