CHCNAV iBase GNSS User Manual
  1. Manuals
  2. Brands
  3. CHCNAV Manuals
  4. Receiver
  5. iBase GNSS
  6. User manual
CHCNAV iBase GNSS User Manual

CHCNAV iBase GNSS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

CHCNAV iBase GNSS
User Guide
Make
your work more efficient

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iBase GNSS and is the answer not in the manual?

Questions and answers

Tarek
April 1, 2025

I have an ibase device that works with an agricultural system. I want to convert it to an RTK surveying system.

User image 67ec1ae841cb4
0
1 comments:
Mr. Anderson
April 1, 2025

To convert a CHCNAV iBase GNSS device from an agricultural system to an RTK surveying system, configure it through a web browser:

1. Access the device’s web interface.
2. Go to the input/output settings submenu.
3. For RTK surveying, configure the RTK Client:
- Tap the Connect button.
- Select a connection protocol (NTRIP, APIS_BASE, or APIS_ROVER).
- Enter the required parameters (such as server address, port, and mount point).
- Click to log on to CORS or APIS.
4. Alternatively, configure as TCP/UDP Client or NTRIP Server:
- Tap Connect next to the chosen option.
- Select TCP, UDP, NTRIP1.0, or NTRIP2.0 as protocol.
- Enter server IP and port.
- Set the messages to output.
- Save settings to complete the connection.

This reconfiguration enables RTK surveying mode.

This answer is automatically generated

0

Related Manuals for CHCNAV iBase GNSS

Summary of Contents for CHCNAV iBase GNSS

  • Page 1 CHCNAV iBase GNSS User Guide Make your work more efficient...
  • Page 2 Revision 2.0 Feb 27, 2023...

  • Page 3: Table Of Contents

    Equipment Setup and Operation ................29 4.1 Post-processing Base Station Setup ................29 4.2 Real-Time Base Station Setup ..................30 4.2.1 Internal Cellular or UHF .................. 30 CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 3...
  • Page 4 5.7.2 WiFi Submenu ....................60 5.7.3 Bluetooth Settings Submenu ................60 5.7.4 Radio Settings Submenu ................. 61 5.8 Firmware Menu ......................62 5.8.1 Firmware Info Submenu ................. 62 CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 4...
  • Page 5 5.8.7 GNSS Board Upgrade Submenu ..............65 5.8.8 Upgrade Online Submenu ................65 5.8.9 GNSS Registration Submenu ................65 5.9 Cloud Service Setting Menu ..................66 5.9.1 Cloud Service Setting Submenu ..............66 CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 5...

  • Page 6: Preface

    1 Introduction The iBase GNSS Receiver User Guide describes how to set up and use the CHC® iBase GNSS receiver. In this manual, “the receiver” refers to the iBase GNSS receiver unless otherwise stated.

  • Page 7: Safety Information

    For license information, consult your local dealer. Bluetooth® operates in license-free bands. Before operating a iBase GNSS receiver, determine if authorization or a license to operate the unit is required in your country. It is the responsibility of the end-user to obtain an operator's permit or license for the receiver for the location or country of use.

  • Page 8: Disclaimer

    Introduction (www.chcnav.com), contact your local CHC dealer from which you purchased the receiver(s). If you need to contact CHC technical support, please contact us by email (support@chcnav.com) or Skype (chc_support). 1.4 Disclaimer Before using the receiver, please make sure that you have read and understood this User Guide, as well as the safety information.

  • Page 9: Getting Started With Ibase

    2 Getting Started with iBase 2.1 About the Receiver The ibase GNSS receiver is a professional GNSS base station. The working performance is close to GNSS receiver with external radio, but user no need to carry heavy external battery, external radio and radio antenna. 5W internal radio ensures that the end user can reach 8km work range.
  • Page 10 • Works as a Confirm button • Hold Fn button and press this button for 5 times continuously to reset the mainboard. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 10...

  • Page 11: Lower Housing

    SIM card slot Battery compartment USB communication and power in port IO serial communication 5/8-11 threaded and power in port insert TNC radio antenna connector 2.2.3 Receiver Ports CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 11...

  • Page 12: Batteries And Power

    AC power. WARNING – Charge and use the rechargeable Lithium-ion battery only in strict accordance with the instructions. Charging or using the battery in unauthorized equipment CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 12...

  • Page 13: Battery Safe

    •If battery fluid gets into your eyes, immediately rinses your eyes with clean water and seek medical attention. Please do not rub your eyes! •If battery fluid gets onto your skin or clothing, immediately use clean water to wash off the CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 13...

  • Page 14: Inserting Battery And Sim Card

    (a) Push down the spring-loaded button on the battery cover to open the cover. (b) Insert the SIM card with the contacts facing downward, as indicated by the SIM card icon on the battery slot. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 14...

  • Page 15: Product Basic Supply Accessories

    Tip – The SIM card is provided by your cellular network service provider. 2.5 Product Basic Supply Accessories Item Picture iBase GNSS Receiver UHF Bar Antenna (450-470 MHz) Lithium Battery H.I. Tape Extension pole CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 15...

  • Page 16: Connecting To A Controller

    Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect. In the Connect screen, select CHC for the Manufacture field, iBase for Device Type field, WIFI for Connection Type field. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 16...
  • Page 17 → select the target device in the list. Tap Connect to link to the hot spot. If the first-time connection to this hot spot, user may type in the password. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 17...

  • Page 18: Connecting Via Bluetooth With Landstar 7 Software

    Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect. In the Connect screen, select CHC for the Manufacture field, iBase for Device Type field, Bluetooth for Connection Type field. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 18...
  • Page 19 Tap the Bluetooth Manager and turn on the Bluetooth function to search Bluetooth device around → select the target device in the list → Tap back button → select the target device in the Bluetooth manager list. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 19...

  • Page 20: Downloading Logged Data

    (2) After the successful connection, open the file manager in the computer and input “ftp:\\192.168.1.1” in the address box. (3) Input user name and password, the default user name and password are “ftp”. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 20...
  • Page 21 (6) Select the destination folder and double click it, two folders named as different data format (hcn and rinex) will be displayed. (7) Select the data format that you configured to save the static data, you will find the static CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 21...

  • Page 22: Web Server Download

    2.7.2 Web Server Download The procedures of downloading logged data through web server refer to 5.4.4 Data Download Submenu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 22...

  • Page 23: Front Panel Operation

    Press Enter to turn on or turn off WIFI Network status displays the if a sim card inserts the RTK Back Press Enter to back to last page CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 23...
  • Page 24 Measurement Press Enter button and switch height phase Center between oblique, vertical, phase center. Antenna Press Enter button and input the Height measured antenna height. 0.0000m CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 24...

  • Page 25: Configure The Working Mode

    Press Enter button to cancel the Cancel settings and back to the second- level menu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 25...
  • Page 26 Enter Press button to cancel the Cancel settings and back to the second-level menu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 26...
  • Page 27 Press Enter button to cancel the settings and back to the second- Cancel level menu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 27...
  • Page 28 Press Enter button to cancel the settings and back to the second- Cancel level menu. Press Enter button to back to the top- Back level menu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 28...

  • Page 29: Equipment Setup And Operation

    For good performance, the following base station setup guidelines are recommended: Components: Name iBase GNSS receiver Extension pole (30 cm) Tribrach adaptor Tribrach w/ Opti Aluminum tripod Lithium battery CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 29...

  • Page 30: Real-Time Base Station Setup

    Use software to configure the receiver as static mode. 4.2 Real-Time Base Station Setup 4.2.1 Internal Cellular or UHF For good rover operation, the following base station setup guidelines are recommended: Components: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 30...

  • Page 31: External Uhf

    Use software to configure the receiver as cellular base or UHF base mode. 4.2.2 External UHF For good performance, the following base station setup guidelines are recommended: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 31...
  • Page 32 Tribrach w/ Opti GPS to datalink cable (power cable) Aluminum tripod Lithium battery Whip antenna 3 m cable for datalink antenna 3m Pole mounting External 410-470 datalink CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 32...

  • Page 33: Real-Time Rover Station Setup

    Use software to configure the receiver as cellular base or UHF base mode. 4.3 Real-Time Rover Station Setup For good performance, the following rover station setup guidelines are recommended: Components: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 33...

  • Page 34: Configuring Through A Web Browser

    3. After the successful connection between your computer and the receiver, enter the IP address (192.168.1.1) of the receiver into the address bar of the web browser on your computer: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 34...
  • Page 35 This chapter describes each configuration menu. To view the web page in another language, select the corresponding language name from the dropdown list on the upper right corner of the web page. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 35...

  • Page 36: Status Menu

    Items include the identities of currently tracked satellites, internal and external storage usage rate, how long the receiver has been operational, state of the CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 36...

  • Page 37: Google Map Submenu

    Use the Satellites menu to view satellite tracking details and enable/disable GPS, GLONASS, BDS and Galileo constellations. These menus include tabular and graphical displays to provide all required information on satellite tracking status. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 37...

  • Page 38: Tracking Table Submenu

    The following figure is an example of satellite track diagram page. Users can determine the satellite types and the corresponding SNR of L-band carriers to be displayed in any combination. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 38...

  • Page 39: Tracking Skyplot Submenu

    Configuring Through a Web Browser 5.2.3 Tracking Skyplot Submenu The following figure is an example of Skyplot page. 5.2.4 Satellite Activation Submenu Use this menu to enable or disable satellites. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 39...

  • Page 40: Receiver Configuration Menu

    Use this screen to configure all the items related to the GNSS antenna. You must enter the correct values for all antenna-related fields, because the choices you make affect the accuracy for logged data and broadcast correction data significantly: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 40...

  • Page 41: Reference Station Settings Submenu

    Auto Base: The receiver will serve as a base after this mode is enabled, and then CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 41...
  • Page 42 Manual Input: Manually input the coordinate of a control point. c) From CORS: After the receiver logging in CORS, the software can record the coordinate of current position based on fix solution. For Sample for Average: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 42...

  • Page 43: Receiver Reset Submenu

    Use this screen to select the web interface language: 5.3.6 User Management Submenu Use this menu to add, delete and modify the login user name and password. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 43...

  • Page 44: Hcppp Settings Submenu

    Here shows the data logging status, including internal and external storage usage and data logging status. Also, users can configure the data logging settings, including recording name, store location, storage limit, store formats, start time, etc. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 44...
  • Page 45 In this screen, you can configure all the data logging parameters, and determine whether the recording files will be affected by the FTP Push. The parameters are mainly as follows: ➢ Auto Record: on or off. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 45...

  • Page 46: Ftp Push Settings Submenu

    Use this screen to configure the receiver to push stored files to the FTP server of your choice. Only files that are configured to use FTP push are transmitted. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 46...

  • Page 47: Ftp Push Log Submenu

    Shows the related information about the recorded filed that be pushed. And users can tap Clear Ftp Send Log button in the upper right corner to clear the log of FTP Push operations. CHCNAV iBase GNSS USER GUIDE | 2023-2...

  • Page 48: Data Download Submenu

    3. To find the file need to be downloaded, click the name of data logging session → the date of file that be recorded → the format of the file → the name of the target file. CHCNAV iBase GNSS USER GUIDE | 2023-2...

  • Page 49: Io Settings Menu

    CMR, RTCM, Raw data, Ephemeris data, GPGGA, GPGSV, on TCP/IP, UDP, serial port, or Bluetooth ports. 5.5.1 IO Settings Submenu The following figure shows an example of the screen that appears when you select this submenu. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 49...
  • Page 50 NTRIP, APIS_BASE and APIS_ROVER → configure the related parameters → click to log on CORS or APIS. ➢ Connection Protocol: NTRIP ➢ Connection Protocol: APIS_BASE CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 50...
  • Page 51 IP and Port of the target server → configure messages that you want to output to the target server → click to save and complete the connection. ➢ Connection Protocol: TCP CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 51...
  • Page 52 Configuring Through a Web Browser ➢ Connection Protocol: UDP ➢ Connection Protocol: NTRIP1.0 CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 52...
  • Page 53 → select one of the connection protocols between NTRIP and TCP → configure the other related parameters → click to save the settings and open the server. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 53...
  • Page 54 Configuring Through a Web Browser ➢ Connection Protocol: TCP ➢ Connection Protocol: NTRIP 4. Serial Port CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 54...
  • Page 55 6. Radio Tap the Settings button to the right of Radio → the Radio Settings screen will appear → select CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 55...

  • Page 56: Network Setting Menu

    HTTP or HTTPS port, and the user name and password of internal FTP site: 5.6.1 Description Submenu Use this submenu to check the information of network setting. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 56...

  • Page 57: Mobile Network Setting Submenu

    Use this submenu to configure GPRS model, network module and modify dialing status. 5.6.3 Email Alarm Submenu Use this submenu to choose which situation of receiver will be alerted and input the email CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 57...

  • Page 58: Http Submenu

    Configuring Through a Web Browser address. 5.6.4 HTTP Submenu Use this submenu to configure HTTP port. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 58...

  • Page 59: Https Submenu

    Use this submenu to configure the user name and password of internal FTP site. 5.7 Module Setting Menu Use this menu to check module information, configure WiFi, bluetooth, radio related settings, and turn on/off static voice of buzzer: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 59...

  • Page 60: Description Submenu

    Use this submenu to turn on/off WiFi function and modify password. 5.7.3 Bluetooth Settings Submenu Use this submenu to turn on/off bluetooth function and modify PIN number. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 60...

  • Page 61: Radio Settings Submenu

    Configuring Through a Web Browser 5.7.4 Radio Settings Submenu Use this submenu to turn on/off radio function and configure radio parameters. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 61...

  • Page 62: Firmware Menu

    Use this submenu to check the current firmware information. The following figure shows an example of the firmware information. 5.8.2 Hardware Version Submenu Use this submenu to check the hardware information, including main board version and core board version: CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 62...

  • Page 63: Config File Submenu

    Use this submenu to download the user log. Tap Download to download current user log; Tick items that you want to see on the user log and tap confirm button to confirm selected user CHCNAV iBase GNSS USER GUIDE | 2023-2...

  • Page 64: Firmware Update Submenu

    The receiver will restart after the firmware upgrading is done, so users need to reconnect the receiver with your computer via Wi-Fi, and then log-in the receiver through a web browser to continue the configuration. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 64...

  • Page 65: Gnss Board Upgrade Submenu

    5.8.9 GNSS Registration Submenu Use this submenu to register the receiver. Paste or enter the registration code to the Registration Code field → tap Registration button to complete the registration. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 65...

  • Page 66: Cloud Service Setting Menu

    5.9 Cloud Service Setting Menu 5.9.1 Cloud Service Setting Submenu Use this submenu to turn on or turn off Cloud Service, Auto Start, Remote Control and configure other settings. CHCNAV iBase GNSS USER GUIDE | 2023-2 P a g e | 66...
  • Page 67 CHC Navigation 577 Songying Road, Qingpu District, 201702 Shanghai, China Tel: +86 21 542 60 273 | Fax: +86 21 649 50 963 Email: sales@chcnav.com | support@chcnav.com Skype: chcnav_support Website: www.chcnav.com This document is intended for general information purposes only. It does not consider the reader’s specific circumstances...
  • Page 68 FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents

Save PDF