Table of Contents
Advertisement
ADA-4010A
1. GENERAL INFORMATION
1.1. GUARANTEE INFORMATION
ADA-4010A converter is covered by a two year warranty from date of sale. The guarantee isn't covering damage to that come from
improper using, the wear and tear or unauthorized changes. If the product doesn't work according to the instruction, he will be repaired
or replaced on described below principles.
All guarantee and not guarantee repairs must be returned with the payed transport and with insuring to the Company CEL-MAR.
CEL-MAR Company under no circumstances won't be responsible for ensuing damage from improper using the product or as a result
of random causes: the lightning discharge, the flood, the fire and the like
CEL-MAR Company isn't suffering no responsibility for ensuing damage and the loss in it: loss of profits, loss of data, pecuniary
losses ensuing from using or the impossibility of using this product.
CEL-MAR Company in peculiar cases will withdraw all guarantees, at the lack of warning the operating manual and not of accepting
conditions of the guarantee by the user.
1.2. GENERAL CONDITIONS FOR SAFE USE
The device should install in the safe and stable place (e.g. switchbox unit), the powering cable should be arranged this way isn't
exposed to treading, catching or tear out from power circuit.
Do not put device on the wet surface.
Do not connect devices for nondescript powering sources,
Do not damage or crush powering wires.
Do not make connection with wet hands.
Do not adapt, open or make holes in casings of the device!
Do not immerse device in water or no other liquid.
Do not put the fire opened on device sources: candles, an oil lamps and the like.
Complete leaving out of the powering network is coming only after disconnecting voltage in the powering circuit.
Do not take the installation or device disassembly if it is turn on. It can lead to the electric short circuit and damaging the device.
1.3. CE LABEL
CE symbol on organizing the company CEL-MAR a conformity of the device to the directive of the electromagnetic EMC
89/336/EWG compatibility means (Electromagnetic Compatibility Directive). The declaration of the agreement is
accessible through the contact with the technical service at the address e-mail: serwis@cel-mar.pl or on the phone at the
+48 41 362-12-46.
1.4. ENVIRONMENTAL PRESERVATION
This sign on the device inform about putting expended device with other waste materials. Device should send to the
recycling. (In accordance with the act about the Electronic Appliance Expended from day 29 of July 2005)
1.5. SERVICE AND CONSERVATION
The ADA-4010A converter doesn't require the periodic conservation.
Technical support at the number: +48 41 362-12-46 in 8.00-16.00, from Monday to Friday.
2. PRODUCT INFORMATION
Thank you for your purchase of CEL-MAR Company product. This product has been thoroughly inspected and tested and is warranted
for an indefinite period for parts and operation under condition of delivering device to CEL-MAR Company on the customer costs. If
any questions or problems arise during installation or use of this product, please do not hesitate to contact Technical Support at +48
41 362-12-46.
2.1. PROPERTIES
● Possibility for adding the address to not addressable device connected to RS232 interface,
● Conversion data format and baud rate on RS485 / RS422 and RS232 converter ports,
● Operating on 2 or 4 wire network in point-to-point or multi-point mode,
● Operating up to 32 devices on RS485 network,
● Conversion of TX, RX signals to RS485/RS422 standard,
● Possibility of connection up to 32 devices on RS485 network,
● Baud rate up to 230,4 kbps,
● Automatic data flow control on RS485 network,
● Transparent for all protocols: MODBUS, DNP and other,
● Any format of byte defined with the specification of RS232 interface,
● Power supply 10 - 30 VDC stable min. 2W,
● 5kV= optoisolation in signal channel between RS232 and RS485/RS422 interface,
● 1kV= or 3kV= galvanic isolation between RS485/RS422 interface and power suppl,
● Implemented short circuit protection and over-voltage protection on RS-485/RS-422 network,
● Connection RS485/RS422 and RS232 network and power supply via screw terminal block,
● Casing compatible with DIN 43880 standard– mounting in typical electro-installation unit,
● Casing adapt to rail mounting according to DIN35 / TS35 standard,
● Casing dimensions (W x D x H) 53mm x 58mm x 90mm.
3
Advertisement
Table of Contents
