Verify The Contents Of The Shipping Carton; Parts And Specialty Tools Required - ETC Echo Relay Panel Feedthrough Installation Manual

Verify the Contents of the Shipping Carton

Standard Echo Relay Panel Feedthrough (ERP-FT) units ship complete and fully pre-wired with
low-voltage relay control. As you remove the panel from the shipping carton, confirm the
following items are included:
ERP-FT with covers and locking doors attached with keys
•
Panel interiors with the quantity and type of relays ordered
•
DMX Preparation Kit
•
Note:
Accessory options are packaged separately.

Parts and Specialty Tools Required

The following parts and specialty tools are required, but not supplied, for installation:
6–8 mm (1/4–3/8 in) bolts or screws, 50–100 mm (2–4 in) long, and suitable wall plugs,
•
are suggested for mounting.
Conduit punch, conduit or bushings - 12.7 mm (1/2 in) diameter
•
Phillips screwdriver
•
Flat blade screwdriver
•
Precision flatblade screwdriver
•
Precision wire stripper with self-adjusting blades or wire stripper that includes a fixed
•
opening for 23–24 AWG
Prepare for Installation 11