Storing And Handling Paper - FujiFilm Revoria Press SC180 Reference Manual

Important
Printing with paper that is different from the paper size or paper type selected in the printer driver or Print
Server, or printing with paper loaded in an unsuitable paper tray, may cause paper jams. Select the correct
paper size, paper type, and paper tray for proper printing.
Note
Metric basis weight is the mass of one sheet of paper of 1 m

Ream weight is the mass of 1,000 sheets of paper, such as paper in a duodecimo (788 x 1,091 mm)

format.
When printing on postcards, use Japanese postcards. To load postcards into the optional high capacity

feeder, the postcard loading guide is required.

Storing and Handling Paper

Storing paper
Follow the guidelines below since paper is susceptible to moisture in the air and easily deformed by
impacts.
Store paper in a place of low humidity. Paper that has absorbed moisture can create paper jams or

poor image quality.
Using paper stored in a low-temperature environment may cause fusing failures. Storing paper in

an environment where the temperature is 16°C or higher is recommended.
Coated paper stored in a high-temperature, high-humidity environment may cause misfeeding or

double-feeding.
After opening a package of paper, seal and store the remaining paper in a moisture-proof wrapper

or a reclosable plastic bag.
To prevent bending or warping, store paper flat. Do not store it upright.

Do not store paper under direct sunlight.

Handling paper
Do not use collected pieces of paper.

Do not use wrinkled or folded paper.

Do not load paper of different sizes or types in the same tray.

Before loading paper into the tray, fan a stack of paper well to prevent paper jams and double-

feeding (multiple sheets of paper are being fed simultaneously) of transparency films, films and
coated paper.
2 Before Using the Machine
12
2 .