Changing The Settings - Toshiba RC-DS10K Instruction Manual

Changing the settings

■ Plug in the cooker, and change the settings with the cooker turned off.
To stop the vacuum pump from making
noise when the timer is set
Change the setting to stop the vacuum pump from
operating when the timer is set. (A vacuum is not created.)
1
Press key for 5
seconds or longer.
2
Press key once to
change the setting to
"2- ".
3
Press
to change the setting.
* Press
(Go back)
4
Press key to finish.
36
RC-DS1018K_EN_0809.indd 36
Default setting when shipped
key
(Go forward)
The vacuum pump does not
operate when the timer is set.
key to change back to the
default setting when shipped.
Returns to the
clock display.
is displayed when
the timer is set for "2-1"
is not displayed
when a timer the set
for "2-2"
does not
light up
If the vacuum pump is too noisy in
the Keep Warm mode
➡
page 23
Changing the vacuum release settings
when soaking* rice
If the sound of the vacuum releasing when soaking *
rice is too loud, change the setting from "4-1" t o "4-2".
1
Press key for 5
seconds or longer.
2
Press key twice to
change the setting to
"4- ".
3
Press key
(Go forward)
to change the setting.
* Press key to change back to the
default setting when shipped.
(Go back)
4
Press key to finish.
Change the vacuum release settings to reduce the
sound of rushing air and clicking.
* When soaking rice for the following cooking
course: <Delicious>.
The vacuum release settings cannot be changed
for other cooking courses.
Default setting when shipped
The vacuum release
setting changes.
Returns to the
clock display.
2016/08/09 10:49:28