Setting The Timer - Toshiba RC-DS10K Instruction Manual

Setting the timer

You can finish cooking rice at the timer set time.
As the cooker can memorize two time settings, you can use them in various ways, such as using Timer1 for
a breakfast, and Timer2 for an evening meal.
Check to see that the current time is correct.
Wash rice and adjust the amount of water for
cooking. Put the inner pot into the cooker main
body and close the outer lid.
1
Press
to select Timer1
or Timer2.
2
Use
(Go back)
completion of cooking.
24-hour clock display
7 AM
7 PM ......... 19:00
3
Check the course.
• Set the cooking course for what you want to cook.
Set the course using
(For details, see page 17.)
4
Press
• The vacuum pump soon starts operating with
and produces a beep sound for a few minutes.
After a while, the
off while the timer is set.
Cooking is completed at the preset time.
To cancel the timer setting
If an error is made in the operation
20
RC-DS1018K_EN_0809.indd 20
Changes to the preset time
key
Displayed
keys to set the time for the
(Go forward)
......... 7:00
Example: Completing cooking
at 7:30 a.m.
,
key.
The timer is set.
is unlit
indication lights up, and then turns
When setting the timer, the vacuum pump and
other parts produce sounds. (See page 35.)
• I f the current time is wrong,
cooking cannot be completed at
the preset time.
• The timer cannot be set when the
inner pot is not in the cooker.
• The display changes between Timer1
and Timer2, each time the TIMER key
is pressed.
• The timer clock can be set in units
of 10 minutes.
• If you hold down the Go back/Go
forward keys, the time will change
quickly.
* For a timer setting that does not
exceed 2 hours, cooking starts
immediately.
The cooker memorizes the preset
time, so you can skip this step the
next time you want to set the timer.
Make sure that you select an
appropriate cooking course for
brown rice, congee, and brown
rice congee.
or key.
（
♪ 1 short beep
If the START key is not pressed,
♪ 1 long beep, 2 short beeps
the cooker will beep 4 times.
( The key must be pressed to complete
Lights
the timer setting.)
• When cooking starts, the START
lamp lights up. (The lamp stays lit
flashing,
up until cooking is complete.)
• When cooking starts, the time to
the completion of cook ing is
displayed. (For details, see page 11.)
Press key.
）
Otherwise, the cooker may boil
over or you may get burned.
2016/08/09 10:49:13