Table of Contents
Advertisement
Changing the settings
■ Plug in the cooker, and change the settings with the cooker turned off.
To stop the vacuum pump from making
noise when the timer is set
Change the setting to stop the vacuum pump from
operating when the timer is set. (A vacuum is not created.)
1
Press
or longer.
2
Press
change the setting to "2-0".
3
Press
change the setting.
* Press
(Go back)
4
Press
is displayed when
the timer is set for "2-1"
is not displayed
when a timer the set
for "2-2"
Vacuum does not
light up
If the rice around the inside of the inner pot becomes mushy or develops a bad odor, check the troubleshooting
guide on page 38, and follow the procedure below to change the Keep Warm settings.
1
Press
or longer.
2
Press
change the setting to "3- ".
3
Press
change the setting.
* Press
(Go back)
36
for 5 seconds
once to
Default setting when shipped
to
(Go forward)
The vacuum pump does not
operate when the timer is set.
to change back to the default
setting when shipped.
to finish.
Returns to the
clock display.
Changing the Keep Warm settings
for 5 seconds
twice to
Default setting when shipped
to
(Go forward)
The setting after changing
to change back to the default
setting when shipped.
Changing the vacuum release settings
when soaking* rice
If the sound of the vacuum releasing when soaking *
rice is too loud, change the setting from "4-1" t o "4-2".
1
Press
for 5 seconds
or longer.
2
Press
3 times to
change the setting to "4-0".
3
Press
(Go forward)
change the setting.
* Press
(Go back)
4
Press
to finish.
Change the vacuum release settings to reduce the
sound of rushing air and clicking.
* When soaking rice for the following cooking
courses: <Delicious>, <Delicious Hard> and
<Delicious Sticky>.
The vacuum release settings cannot be changed
for other cooking courses.
4
Press
to finish.
If no improvement is made despite following the
procedure to change the Keep Warm Settings,
contact the shop from which the product was
purchased. (See page 43)
If the vacuum pump is too noisy in the Keep Warm mode
➡
page 23
Default setting when shipped
to
The vacuum release
setting changes.
to change back to the default
setting when shipped.
Returns to the
clock display.
Returns to the
clock display.
Advertisement
Table of Contents
