Drive Cage - HP ProDesk 400 G5 SFF Maintenance And Service Manual

Drive cage

Follow these steps to remove the drive cage:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect the power cable (1)from the 2.5-inch hard drive.
4. Disconnect the data cable (2)from the 2.5-inch hard drive.
5. Disconnect the power cable (1)from the 3.5-inch hard drive.
6. Disconnect the data cable (2)from the 3.5-inch hard drive.
7. Press down on the drive cage release tab (1).
8. Lift the right side of the drive cage (2)until it rests at an angle.
Preparation for disassembly on page
Access panel on page 32).
31).
Drive cage 35