Front Bezel - HP ProDesk 400 G5 SFF Maintenance And Service Manual

Front bezel

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Detach the four clips (1)on the top edge of the front bezel from the tabs on the computer chassis.
4. Swing the top edge of the front cover (2)away from the computer chassis.
5. Remove the front bezel.
Reverse this procedure to install the front bezel.
34 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 32).
31).