Using Ac Power; Turning The Camcorder On/Off - Sony PXW-Z190 Operating Instructions Manual

Using AC power

Connecting the camcorder to a power outlet
allows use without worrying about the need to
recharge the battery pack.
DC IN
connector
1
Connect the power cord (mains lead) to the AC
Adapter.
2
Connect the AC Adapter to the DC IN connector of the
camcorder.
3
Connect the power cord (mains lead) to the wall outlet
(wall socket).
AC adapters
• Do not connect and use an AC adapter in a
confined space, such as between a wall and
furniture.
• If a problem occurs during operation,
immediately disconnect the power cord from
the outlet.
• Do not short-circuit the plug of the AC adapter
with any metallic objects. Doing so will cause a
malfunction.
• You cannot charge the camcorder by
connecting it to the AC Adapter.
AC adapter plug

Turning the camcorder on/off

To turn the camcorder on, set the ON/STANDBY
switch (page 9) to the ON position ([). To turn the
camcorder off, set the ON/STANDBY switch to
the STANDBY position (1).
Notes
• Even when the ON/STANDBY switch is set to the
STANDBY position, the unit continues to draw
standby electric power. Remove the battery pack if not
using your camcorder for an extended period.
• Remove the battery or disconnect the DC IN power
supply after the power lamp is extinguished when the
power switch is set to the STANDBY position. If
power is removed while the switch is in the ON
position, a malfunction of the camcorder or memory
cards may occur.
21