Sony PXW-Z190 Operating Instructions Manual page 97

Solid-state memory camcorder
Hide thumbs Also See for PXW-Z190:
Table of Contents

Advertisement

Audio
Item
Sub-items and Settings
Audio Input
CH2 Wind Filter
On / Off
Audio input
settings
CH3 Wind Filter
On / Off
CH4 Wind Filter
On / Off
CH3 Level Control
Auto / Manual
CH4 Level Control
Auto / Manual
CH3 Input Level
0 to 99 (49)
CH4 Input Level
0 to 99 (49)
Limiter Mode
Off / –6dB / –9dB / –12dB /
–15dB / –17dB
CH1&2 AGC Mode
Mono / Stereo
CH3&4 AGC Mode
Mono / Stereo
AGC Spec
–6dB / –9dB / –12dB /
–15dB / –17dB
1kHz Tone on Color Bars
On / Off
Audio Output
Monitor CH
CH1/CH2 / CH3/CH4 / MIX
Audio output
ALL / CH1/ CH2 / CH3 / CH4
settings
Headphone Out
Mono / Stereo
Alarm Level
0 to 7 (4)
HDMI Output CH
CH1/CH2 / CH3/CH4
Analog Output CH
CH1/CH2 / CH3/CH4
Description
Turns the wind noise reduction filter for recording on channel
2 on/off.
Turns the wind noise reduction filter for recording on channel
3 on/off.
Turns the wind noise reduction filter for recording on channel
4 on/off.
Selects auto/manual adjustment of the input level for
recording on channel 3.
Selects auto/manual adjustment of the input level for
recording on channel 4.
Sets the input level for recording on channel 3 when manual
adjustment is selected.
Sets the input level for recording on channel 4 when manual
adjustment is selected.
Selects the limiter characteristic (saturation level) for large
signals when adjusting the audio input level manually.
Selects the auto level adjustment mode for recording on
channel 1 and channel 2. When Stereo is selected, AGC is
linked between channels.
Selects the auto level adjustment mode for recording on
channel 3 and channel 4. When Stereo is selected, AGC is
linked between channels.
Selects the AGC characteristic (saturation level) for large
signals when adjusting the audio input level automatically.
Turns the 1 kHz reference tone signal on/off when displaying
color bars.
Selects the audio channel output to the headphone jack and
built-in speaker.
Sets the headphones output to monaural (Mono) or stereo
(Stereo).
Sets the alarm volume.
Selects the combination of audio channels on the HDMI
output.
Selects the combination of audio channels on the analog audio
output.
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pxw-z190tPxw-z190v

Table of Contents