Steps
1. Place the heatsink onto the system board ensuring the mounting points on heatsink and system board align.
2. Tighten the four captive screws to secure the heatsink to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
Card.
4. Follow the procedure in
System board
Removing the system board - Discrete
Prerequisites
1. Follow the procedure in
2. Remove the
SD
Card.
3. Remove the
base
cover.
4. Disconnect the battery.
5. Remove the
memory
modules.
6. Remove the
WWAN
card.
7. Remove the
WLAN
card.
8. Remove the
solid state
9. Remove the heatsink.
About this task
The figure indicates the location of the system board and provides a visual representation of the removal procedure.
After working inside your
before working inside your
drive.
computer.
computer.
Disassembly and reassembly
49