Connection; Power - Dell P101F Service Manual

Table 6. Storage (continued)
Options

Connection

This section provides connection details and settings.
Table 7. Connection
Options
Wireless Device Enable
Enable UEFI Network Stack
Wireless Radio Control

Power

This section provides power details and settings.
Table 8. Power
Options
Battery configuration
Advanced Configuration
Enable Advanced Battery Charge Configuration
90 BIOS setup
Description
● Secure Digital(SD) Card Read-Only Mode
Description
This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:
● WLAN (enabled by default)
● Bluetooth (enabled by default)
This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.
(ON by default)
This section contains a toggle switch that allows the user
to enable or disable a feature where the system will sense
a connection to a wired network and disable the WLAN or
WWAN connection. (ON by default)
Description
This section provides options to enable different power modes
on the computer. The options are as follows:
● Adaptive - battery settings are adaptively optimized based
on the users typical battery usage patterns (selected by
default).
● Standard - Fully charge the battery at a standard rate.
● ExpressCharge - The battery may be charged over a
shorter period using Dell's fast charging technology.
● Primarily AC use - The battery lifespan for users who
primarily operate their system while plugged in to an
external power source.
● Custom - Custom select when the battery starts and stops
charging.
○ Custom Charge Start
○ Custom Charge Stop
This feature maximizes battery health while still supporting
heavy use during the work day. The section contains a toggle
switch that allows the user to enable or disable this feature
and set the daily times and work time periods (OFF by
default).