Installing The Display Assembly - Dell P101F Service Manual

Steps
1. Remove the five M2.5x5 screws from both the hinges followed by the single M2.5x4 from the right hinge. Lift and fold the
hinges backwards.
NOTE: Do not open the display assembly beyond 135 degrees to avoid damage to the display hinges.
2. Peel back the adhesive tape covering the LCD cable.
3. Fold the adhesive tape away from the LCD cable.
4. Remove the LCD cable and lift it away from the computer.
5. Move the system away from the LCD assembly.

Installing the Display Assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the LCD Assembly and provides a visual representation of the installation procedure.
Disassembly and reassembly 67