Fan Assembly; Removing The Fan Assembly - Dell P101F Service Manual

Fan Assembly

Removing the Fan Assembly

Prerequisites
1. Follow the procedure in
2. Remove the SD Card.
3. Remove the base cover.
4. Disconnect the battery.
About this task
The figure indicates the location of the fan assembly and provides a visual representation of the removal procedure.
Steps
1. Disconnect the IO board cable from the connector on the system board and remove the cables from the cable management
routes along side the fan assembly.
2. Remove the two (M2x2) screws from the fan assembly.
44 Disassembly and reassembly
before working inside your computer.