Table of Contents
Advertisement
4.8
Installation on a desktop pedestal
Requirement
There is a mini SIM card for the device.
Installation
1. Insert the SIM card, refer to the section "SIM card (Page 67)".
2. Place the third housing guide of the device on the top edge of the pedestal
3. Press the device down against the pedestal until the spring catch locks in place
4. Connect the power supply, refer to the section "Power supply (Page 59)".
5. Fit the connectors for the digital input and digital output, refer to the section "Digital input/
output (Page 61)".
6. Connect the antenna, refer to the section "Antennas (Page 63)".
7. Connect the device to the local network, refer to the section "Ethernet port (Page 66)".
8. Connect the terminal with as short a cable as possible ≤ 150 mm and a large cross-sectional
area ≥ 1.5 mm² to the functional ground of the system, refer to the section "Terminals
(Page 30)" and section "Grounding (Page 60)".
SCALANCE M874, M876
Operating Instructions, 02/2023, C79000-G8976-C331-12
Installation and removal
4.8 Installation on a desktop pedestal
①
.
②
.
51
Advertisement
Table of Contents
