Siemens SIMATIC NET SCALANCE M874 Operating Instructions Manual page 118

Approvals
10.4 General approvals
FM
The product meets the requirements of the standards:
• Factory Mutual Approval Standard Class Number 3611 / 3600 / 3810 / ANSI ISA-61010-1
• FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
cULus Approval for Information Technology Equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
• UL 62368-1
• CSA C22.2 No. 62368-1
Report no. E115352
cULus approval for industrial control equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
• UL 61010-1
• UL 61010-2-201
• CSA C22.2 NO 61010-1
• CSA C22.2 NO 61010-2-201
Report no. E115352
cULus Approval Hazardous Location
cULus Listed I. T. E. for HAZ. LOC.
Underwriters Laboratories Inc. complying with
• UL 121201 (Non Incendive electrical equipment) approved for use in Class I, Division 2,
Groups A, B, C, D, T4.
• UL CSA C22.2 NO 213 (Non Incendive electrical equipment) approved for use in Class I, Zone
2, Group IIC, T4.
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
Australian Communications and Media Authority, for compliance levels 1, 2 and 3 in Australia
and levels of conformity 1, 2 and 3 in New Zealand. As required by notices under:
• Section 182 of the Australian Radiocommunications Act 1992;
• Section 407 of the Australian Telecommunications Act 1997; and
• Section 134 of the New Zealand Radiocommunications Act 1989
118
Operating Instructions, 02/2023, C79000-G8976-C331-12
SCALANCE M874, M876