Siemens SIMATIC NET SCALANCE M874 Operating Instructions Manual page 6

Industrial remote communication remote networks
Table of Contents

Advertisement

Preface
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer's exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/cert (https://www.siemens.com/cert).
Firmware
The firmware is available on the Internet pages of the Siemens Industry Online Support
support.industry.siemens.com/cs/ww/en/ps/15982/dl):
Note on firmware/software support
Check regularly for new firmware/software versions or security updates and apply them. After
the release of a new version, previous versions are no longer supported and are not maintained.
Error/fault
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are
not permitted.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing confidential
data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
6
Operating Instructions, 02/2023, C79000-G8976-C331-12
(https://
(https://
SCALANCE M874, M876

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net scalance m876

Table of Contents