Siemens SIMATIC NET SCALANCE M874 Operating Instructions Manual page 99

Industrial remote communication remote networks
Table of Contents

Advertisement

Antenna gain for M876-4
Note
Depending on the selected wireless standard and the wireless frequency used, antennas with
different antenna gains can be used. If you change the frequency band during operation, it is
possible that the maximum permitted antenna again also changes. Check whether the antenna
you are using is approved for the changed frequency range. If necessary, change the antenna so
as not to violate the operational requirements. Or use an antenna with a gain less than 3.58 dBi
to cover all bands.
Frequency band
GSM /GPRS 900
E-GPRS 900
GSM /GPRS 1800
E-GPRS 1800
UMTS FDD1
UMTS FDD III
UMTS VIII
LTE FDD 3
LTE FDD 7
LTE FDD 8
LTE FDD 20
Antenna gain for M876-4NAM
R&TTE / RED (Europe)
Frequency band
900 MHz
FFC (USA)
Frequency band
850 MHz
1700 MHz
1900 MHz
SCALANCE M874, M876
Operating Instructions, 02/2023, C79000-G8976-C331-12
GSM /GPRS 900
GSM /GPRS 1800
LTE
850 MHz = band 5
700 MHz = band 17
GSM
850 MHz = GSM 850
UMTS with HSPA+
850 MHz = band V
LTE
AWS = band 4
UMTS with HSPA+
AWS = band IV
LTE
1900 MHz = band 2
GSM
1900 MHz = GSM 1900
UMTS with HSPA+
1900 MHz = band II
Technical specifications
Maximum antenna gain in dBi
3.58
9.88
9.84
13.85
13.35
13.45
10.27
12.66
13.86
10.58
8.76
Maximum antenna gain in dBi
2.96
8.85
Maximum antenna gain in
dBi
3.25
3.25
3.25
3.25
5.5
5.5
2.51
2.51
2.51
8.7 Antenna gain
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic net scalance m876

Table of Contents