Dismounting Steps For All Versions - Vega VEGASON 64 Operating Instructions Manual

Mounting
Tools
Dismounting the electronics
module
8
Electronics module SN-SE.64C is suitable for VEGASON 64,
65, 66 version C and D.
The following tools are required for dismounting and subse-
quent re-mounting of the emitting electronics:
magnetic Phillips screwdriver size 1
l
magnetic Phillips head size x
l
Slotted screwdriver 4 mm (only with stainless steel and Alu
l
double chamber housing)
pliers for locking ring (version axle)
l
Torx key T15 (only with version A).
l
hexagon spanner size 4 (only with version b).
l

4.3 Dismounting steps for all versions

First of all the electronics module is dismounted and the
existing housing removed.
The electronics module is located in the electronics compart-
ment. The below illustrations show the respective position of
the electronics compartment in a single or double chamber
housing.
Fig. 5: Single chamber housing
1 Position of the electronics compartment
Fig. 6: Double chamber housing
1 Position of the electronics compartment
Proceed as follows:
Emitting electronics - for VEGASON 64, 65, 66
1
1