Installing The Lower Triple Clamp - KTM F8101S5 Owner's Manual

11.10

Installing the lower triple clamp

Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
S02307-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
F01562-10
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
H01182-11
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
SERVICE WORK ON THE CHASSIS 11
p. 140)
1
2 3
and O-ring
4
but do not tighten yet.
5
of the right fork leg is positioned to
of the left fork leg faces the front.
is correctly posi-
.
55