Table of Contents
Advertisement
Pulse Width Modulation
To adjust the frequency of the pulse width modulation:
1. Go to the Settings main level.
2. Select the PWM Option option.
3. Select the frequency, from 600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 15000Hz.
LED Power
To set the maximum power of the LED output:
1. Go to the Settings main level.
2. Select the LED POWER option.
3. Set the power from 064–255.
Minimum Zoom Focus
To enable or disable the minimum zoom focus function:
1. Go to the Settings main level.
2. Select the Min Zoom Focus option.
3. Select from NO (disable), or YES (enable).
Preset Selection
To select a preset configuration of menu options:
1. Go to the Settings main level.
2. Select the Preset Select option.
3. Select from PRESET A (default), PRESET B, or PRESET C.
•
Changes to settings automatically save to the currently selected Preset.
•
If no Preset has been selected, changes to settings save to PRESET A.
•
After selecting a Preset, the product will restart.
Preset Synchronization
To transfer saved Presets from one Maverick Force 3 Profile to another:
1. Connect the Maverick Force 3 Profile products to receive the Presets by a DMX daisy chain.
2. Make the Maverick Force 3 Profile with the Presets to transfer the first in the DMX daisy chain.
3. Power on all of the products.
4. Set all of the products to a
5. On the Maverick Force 3 Profile with the Presets, go to the Settings main level.
6. Select the Preset Sync option.
7. Select NO (to cancel) or YES (to transfer the Presets to the connected products).
•
All menu configurations are transferred except for the IP address.
•
ONLY connect Maverick Force 3 Profile products for this function!
USB Update
To enable or disable software update using USB:
1. Go to the Settings main level.
2. Select the USB Update option.
3. Select NO (disables software update through USB) or YES (enables software update through
USB).
See the
USB Software Update
Maverick Force 3 Profile software using a USB C connection.
Minimum Zoom Focus
To enable or disable the Min Zoom Focus function:
1. Go to the Settings main level.
2. Select the Min Zoom Focus option.
3. Select NO (manual independent zoom control) or YES (focus adjusts depending on zoom setting).
22
Control Mode
other than WDMX. (DMX, ArtNet, or sACN)
section for the detailed instructions on how to update the
Maverick Force 3 Profile User Manual Rev. 1
Operation
Advertisement
Table of Contents
