Table of Contents
Advertisement
Operation
Reset Function
To reset specific functions or the entire product:
1. Go to the Settings main level.
2. Select the Reset Function option.
3. Select the functions to reset, from Pan/Tilt, IrisPrism, Color/CMY/Blade, Gobo/Gobo Rotate,
Frost/Animation, or All.
4. Select NO (to cancel) or YES (to reset the selected functions).
Factory Reset
To reset the product to factory settings:
1. Go to the Settings main level.
2. Select the Factory Settings option.
3. Select NO (to cancel) or YES (to reset the product configuration).
Test Mode
Auto Test
To have the Maverick Force 3 Profile automatically test all functions one after the other:
1. Go to the Test main level.
2. Select the Auto Test option.
Manual Test
To manually test an individual function of the Maverick Force 3 Profile:
1. Go to the Test main level.
2. Select the Manual Test option.
3. Select a function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Dimmer Fine,
Shutter, Virtual Shaking, Cyan, Magenta, Yellow, CTO, Color, Gobo, Gobo Rotate, Gobo
Index, Gobo2, Animation, Animation Rotate, Blade1- 1, Blade1- 1 Fine, Blade1- 2, Blade1- 2
Fine, Blade2- 1, Blade2- 1 Fine, Blade2- 2, Blade2- 2 Fine, Blade3- 1, Blade3- 1 Fine, Blade3-
2, Blade3- 2 Fine, Blade4- 1, Blade4- 1 Fine, Blade4- 2, Blade4- 2 Fine, Blade Rotate, Blade.
Rota Fine, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, Prism, Prism Rotate, Prism2,
Prism2 Rotate, Iris, Frost, Frost2, CMY Macro, CMY Macro Speed, or Control.
4. Increase or decrease the value of the selected function from 0–255 to test it.
System Information
The information section of the menu displays statistics and the current status of the product's various
functions. To view this information:
1. Go to the Information main level.
2. Select from the Fixture Information, Fan Information, Error Information, or Channel
Information options.
3. Use <UP> and <DOWN> to view all information.
Offset Mode (Zero Adjust)
The Offset mode provides fine adjustments for the home position of every moving part in the optical path
as well as the pan and tilt movements. To adjust these options and prevent borders showing or reduction of
the light output:
1. From the main level screen, press and hold <MENU> until the passcode screen appears.
2. Enter the passcode: 0920 and press <ENTER>.
3. Select the "zero" position to adjust, from PAN, TILT, COLOR, GOBO, GOBO ROTATE, GOBO2,
ANIMATION, FOCUS-GOBO, FOCUS-GOBO2, ZOOM, PRISM, PRISM2, PRISM2 ROT, IRIS,
FROST, FROST2, CYAN, MAGENTA, YELLOW, CTO, BLADE1- 1, BLADE1- 2, BLADE2- 1,
BLADE2- 2, BLADE3- 1, BLADE3- 2, BLADE4- 1, BLADE4- 2, BLADE ROTATE, DIMMER1,
DIMMER2, DIMMER3, RDM ID4, RDM ID5, RDM ID6, MAC4, MAC5, or MAC6.
4. Adjust the "zero" position for the selected function from 000–255.
Maverick Force 3 Profile User Manual Rev. 1
23
Advertisement
Table of Contents
