Table of Contents
Advertisement
Signal Connections
The Maverick Force 3 Profile can receive a DMX, Art-Net™, or sACN, signal. The Maverick Force 3 Profile
has two Amphenol XLRnet through ports, and both 3-pin and 5-pin DMX in and out ports. If using other
compatible products with this product, it is possible to control each individually with a single controller.
Control Personalities
The Maverick Force 3 Profile uses a 3-pin or 5-pin DMX data connection, WDMX, Art-Net™, or sACN for
its two control personalities: Dmx Mode 37 CH and Dmx Mode 53 CH.
•
Refer to the
Operation
these personalities.
•
The
Control Channel Assignments and Values
control personalities.
For more information about DMX standards or the DMX cables needed to link this product
to a DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com.
DMX Linking
The Maverick Force 3 Profile can link to a DMX controller using a 3-pin or 5-pin DMX connection or a
WDMX connection. For more information about DMX, read the DMX primer at:
www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using an
Amphenol XLRnet RJ45 connection over a large network. An Art-Net™ protocol document is available
from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Streaming ACN (Architecture for Control Networks), also known as ANSI E1.31, is an Ethernet protocol that uses
the layering and formatting of ACN to transport DMX512 data over IP or any other ACN-compatible network.
Connection Diagram
Computer/
Controller
(running Art-Net™
or sACN protocol)
8
chapter to learn how to configure the Maverick Force 3 Profile to work in
section provides detailed information regarding the
Switch or Router
https://
Maverick Force 3 Profile
To other Art-Net™ or sACN devices
Maverick Force 3 Profile User Manual Rev. 1
Setup
Advertisement
Table of Contents
