Table of Contents
Advertisement
Operation
Touchscreen Calibration
To calibrate the touchscreen:
1. Go to the Settings main level.
2. Select the Calibration option.
3. Select from NO (cancel), or YES (calibrate).
4. Follow the instructions on the display.
Touchscreen Lock
To lock the touchscreen and limit the display to operation by the menu buttons:
1. Go to the Settings main level.
2. Select the Touchscreen Lock option.
3. Select from NO (do not lock the touchscreen), or YES (lock the touchscreen).
Swap Pan and Tilt
To swap the controls for the pan and tilt:
1. Go to the Settings main level.
2. Select the Swap XY option.
3. Select from NO (pan controls pan, tilt controls tilt) or YES (pan controls tilt, tilt controls pan).
WDMX Reset
To reset the WDMX connection:
1. Go to the Settings main level.
2. Select the WDMX Reset option.
3. Select from NO or YES.
Display Backlight Timer
To set how long before an inactive display will turn off:
1. Go to the Settings main level.
2. Select the Backlight Timer option.
3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or
ON (always on).
Loss of Data
To select how the product will respond to a loss of the control signal:
1. Go to the Settings main level.
2. Select the Loss of Data option.
3. Select from Hold (holds last signal received) or Close (blacks out fixture).
Fan Mode
To set the fan speed mode:
1. Go to the Settings main level.
2. Select the Fans option.
3. Select the fan mode, from Auto (fan speed adjusts to product temperature), Full (fan speed at
maximum), ECO (quiet mode), TV25 (maintains a consistent LED output up to an ambient
temperature of 77 °F [25 °C]), or TV35 (maintains a consistent LED output up to an ambient
temperature of 95 °F [35 °C]).
When using the fan modes TV25 or TV35, please set the PWM Options to 6000Hz or
15000Hz to prevent any possible harmonization noise.
Dimmer Curve
To set the dimmer curve:
1. Go to the Settings main level.
2. Select the Dimmer Curve option.
3. Select the dimmer curve, from Linear, Square, I Squa, SCurve or Linear2.
Maverick Force 3 Profile User Manual Rev. 1
21
Advertisement
Table of Contents
