Signal Connections; Control Personalities; Dmx Linking; Art-Net™ Connection - Chauvet Professional Maverick Force 2 SoloWash User Manual

Signal Connections

The Maverick Force 2 SoloWash can receive a DMX, Art-Net™, or sACN, signal. The
Maverick Force 2 SoloWash has 2 Amphenol XLRnet through ports, and 3-pin / 5-pin DMX in and out
ports. If using other compatible products with this product, it is possible to control each individually with a
single controller.

Control Personalities

The Maverick Force 2 SoloWash uses a 3 or 5-pin DMX data connection, WDMX, Art-Net™, or sACN for
its two control personalities: DMX Mode 21 CH and DMX Mode 27 CH.
• Refer to the Operation
these personalities.
• The Control Channel Assignments and Values
control personalities.
For more information about DMX standards or the DMX cables needed to link this product
to a DMX controller, download the DMX Primer from the Chauvet website:
www.chauvetprofessional.com.

DMX Linking

It is possible to link the Maverick Force 2 SoloWash to a DMX controller using a 3 or 5-pin DMX connection
or a WDMX connection. For more information about DMX, read the DMX primer at:
https://www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using
an Amphenol XLRnet RJ45 connection over a large network. An Art-Net™ protocol document is available
from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Streaming ACN (Architecture for Control Networks), also known as ANSI E1.31, is an Ethernet protocol that uses
the layering and formatting of ACN to transport DMX512 data over IP or any other ACN-compatible network.

Connection Diagram

Computer/
Controller
(running Art-Net™
or sACN protocol)
The four LED indicators in between the ethernet through ports indicate a connection to a
network and activity on that network. They do not indicate whether or not the
Maverick Force 2 SoloWash is receiving a signal from a controller.
10
chapter to learn how to configure the Maverick Force 2 SoloWash to work in
section provides detailed information regarding the
Switch or Router
Maverick Force 2 SoloWash User Manual Rev. 2
Setup
Maverick Force 2 SoloWash
To other Art-Net™ or sACN devices