Identification; Marking; Safety; Designated Use - Abicor Binzel xFUME ABIROB AF500 Operating Instructions Manual

1 Identification

1 Identification
The xFUME
®
welding using inhert (MIG) or active (MAG) gases. This version is air cooled and can be used in all welding
positions.
These operating instructions only describe the xFUME
torch system may only be operated with original ABICOR BINZEL spare parts.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding
marketing has been affixed to the product, if required.

2 Safety

Please observe the attached ''Safety Instructions'' document.

2.1 Designated Use

•
The device described in these instructions may be used only for the purpose and in the manner described in
these instructions. In doing so, observe the operating, maintenance, and servicing conditions.
•
Any other use is considered improper.
•
Unauthorized modifications or changes to enhance the performance are not permitted.

2.2 Obligations of the Operator

• Only the following personnel may work on the device:
• those who are familiar with the basic regulations on occupational safety and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and
experience.
• Keep other people out of the work area.
• Observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.
ABIROB AF500 welding torch system is used in the industry and in the trade for shielding gas
®
ABIROB AF500 welding torch system. The welding
® ®
®
xFUME
® ABIROB AF500
EN 3