Identification; Eu Declaration Of Conformity; Responsibilities Of The User; Product Description - Abicor Binzel FES-200 Operating Instructions Manual

FES-200

1 Identification

The fume extraction system FES-200 is used in industry and the trade for the extraction of welding fume. It
is available with connection voltages 115 V and 230 V. These operating instructions only describe
the FES-200 The fume extraction system FES-200 may only be operated using original ABICOR BINZEL
spare parts.

1.1 EU Declaration of Conformity

according to the EC Directives:
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2004/108/EC.
Use of Work Equipment Directive 2009/104/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
hereby declare that, on the basis of its design and construction and in the present version, the product
described in these operating instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Designation
Harmonized standard applied
Tab. 1

1.2 Responsibilities of the User

Within the EEA (European Economic Area), the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially Directive
(2009/104/EC) concerning the minimum safety and health requirements for the use of work equipment by
workers at work must be adhered to. In Germany, the Labor Protection Law and the Company Safety
Ordinance must be heeded. In addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EEC) and that the signal utilization of the integrated welding
current monitoring against stray currents is installed properly.

2 Product description

2.1 Designated use

The fume extraction system FES-200 forms part of the welding system and is intended for manual torch use.
Designated use also includes the observance of the prescribed operating, maintenance and servicing
instructions.

2.2 Use contrary to the designated use

Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorised conversions or power increase modifications are not allowed.
FES-200
DIN EN ISO 12100, EN 13857, EN 349, EN 60335,
EN 61000-6-3, EN 61000-6-4, EN 61000-3 Part 11
Declaration of Conformity
1 Identification
EN - 3