Identification; Eu Declaration Of Conformity; Responsibilities Of The User; Product Description - Abicor Binzel ABIROB Operating Instructions Manual

®
ABIROB A

1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 EU Declaration of Conformity

1.2 Responsibilities of the User

2 Product Description

2.1 Designated Use

The welding torch system ABIROB
inert gas welding using inert gases (MIG) or active gases (MAG). This model
is air-cooled and can be used in all welding positions. These operating
instructions only describe the welding torch system ABIROB
®
torch system ABIROB
ABICOR BINZEL spare parts.
according to EC Low Voltage Directive 06/95/EC, Annex III.
We, Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction, the welding
®
torch system ABIROB
with the basic safety and health requirements of the EC directive. Any
modification not agreed with us will void this declaration.
Welding torch system Produktname 360, A500
EC Low Voltage Directive 06/95/EC Anhang III
DIN EN 60 9747 Part 7
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch system ABIROB
in connection with welding units comply with the EC EMC Directive (89/336/
EEC) and that the signal utilization of the integrated welding current monitoring
against stray currents is installed properly.
The liquid-cooled welding torch system ABIROB
and automatic application. Designated use also includes the observance of the
prescribed operating, maintenance and servicing conditions.
®
A is used in industry and in the trade for
A may only be operated using original
A described in these operating instructions complies
1 Identification
®
A. The welding
®
A must be used for robot
EN - 3
®
A