Identification; Marking; Signs And Symbols Used; Classification Of The Warnings - Abicor Binzel RTM ABIx EasyTeach Original Operating Instructions

RTM ABIx EasyTeach

1 Identification

These operating instructions describe only the multifunction flange <RTM ABIx EasyTeach> and the
corresponding software extension for the robot control system <URCap>.
These operating instructions apply only in connection with the instruction leaflet for the installation and use
of the robot control system <URCap>.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.

1.2 Signs and symbols used

The following signs and symbols are used in the operating instructions:
1
A

1.3 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown prior to
potentially dangerous work steps. The following signal words are used depending on the type of hazard:
Describes an imminent threatening danger. If not avoided, it may cause severe injuries or death.
Describes a potentially dangerous situation. If not avoided, this may result in death or serious injuries.
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or material damage and indicates irreparable damage to the
device or equipment.

2 Scope of delivery

— 1 × multifunction flange incl. attachment materials
— 1 × connecting cable
— 1 × operating instructions
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further information.
Caption, item description.
DANGER
WARNING
CAUTION
1 Identification
DE - 3