Identification; Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel ABIPLAS WELD 250 MT Operating Instructions Manual

®
ABIPLAS WELD 250 MT

1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 Information regarding the EU Declaration of Conformity

1.2 Responsibilities of the User

The welding torch system ABIPLAS
automatic inert gas welding using inert or active gases. The welding torches
are liquid-cooled. The ABIPLAS
recooling system. These operating instructions only describe the welding torch
®
system ABIPLAS WELD 250 MT. The welding torch system ABIPLAS
WELD 250 MT may only be operated using original ABICOR BINZEL
spare parts. The warranty regulations are only valid in connection with the use
of original ABICOR BINZEL plasma torches and cable assemblies.
according to the EC Directive:
Machinery Directive 2006/42/EC
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG,
hereby declare that, on the basis of its design and construction, the welding
torch system ABIPLAS
instructions complies with the basic safety and health requirements of the EC
directive. Any modification not agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Welding torch system ABIPLAS
Machinery Directive 2006/42/EC
EN 60974-7, DIN EN ISO 12 100
Within the EEA (European Economic Area), the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (2004/108/EC) and that the signal
utilisation of the integrated welding current monitoring against stray currents is
installed properly.
®
WELD 250 MT is used in industry for
®
WELD 250 MT requires an active
®
WELD 250 MT described in these operating
1 Identification
®
WELD 250 MT
EN - 3
®