Spare Parts - FLOWTECH flowpress WMDA Operation And Maintenance Manual

Spare Parts

The drawings on the following pages show the internal components for a range of pressurisation
equipment. Due to continuing development and minor design changes, some components
may be changed without notice. Therefore, the drawings may not accurately reflect the current
production design. If in any doubt about the compatibility of replacement parts, please contact
ID Part Description
1 CONTROLLER
2 ELECTRICAL PLATE
3 TWO PUMP ON/OFF SWITCH
*Image for indication only
ID Number (4) is included with part of Electrical plate as standard, this rated at 6.3 Amp.
flowpress
WMDA Pressurisation Units
29