Siemens RUGGEDCOM M2100F Installation Manual page 16

Chapter 1
Introduction
There are three ways to determine if a security seal has been tampered with:
• The seal is cut or torn
• A pattern is left on the device when the top layer of the seal is removed
• Residue left by the seal is visible on the device under ultra-violet light
For information about the placement of security seals, refer to the
Security Policy [https://support.industry.siemens.com/cs/ww/en/view/109757984].
6
RUGGEDCOM ROS-F FIPS 140-2 Non-Proprietary
Tamper-Evident Security Seals
RUGGEDCOM M2100F
Installation Guide