IOGear M1102-a User Manual page 29

Step 13
Read the License Agreement and click "I Agree"
then click "Next" if you wish to continue with the
firmware upgrade. Otherwise, click "Cancel" to
exit.
Step 14
Choose the correct KVM* that you wish to perform
firmware upgrade from the "Device List" and then
click "Next" to continue. Then the Firmware Upgrade
Utility will verify if there is a KVM connected to the
computer by the firmware upgrade cable. (Check
Firmware Version checkbox is optional)
*Note: Please choose MAIN to proceed the
firmware upgrade. IO1 and IO2 are sub layers in
the KVMs firmware.
56
Step 15
If you have checked the "Check Firmware Version"
checkbox, then the utility will check the current
firmware that is on your KVM. If the current
firmware is newer than the firmware that you wish
to upgrade to, a window will popup and prompt
you to ask if you wish to proceed. Simply click
"Yes" to start the upgrade and "No" to cancel the
upgrade.
Note: If you did not check the "Check Firmware
Version" checkbox, utility will perform the upgrade
automatically no matter what version of firmware
you have in the KVM.
Step 16
Warning window may popup again for 2nd part of
the firmware upgrade (IO1).
Step 17
Then another warning window may popup for
3rd part of the firmware upgrade (IO2). (This is for
GCS1716 only)
57